Marble · Türkiye
Black Diamond
Deep black with a crystalline sparkle
- Origin Türkiye
- Stone type Marble
- Vein Crystalline texture
- Block yield medium
- Bookmatch Not advised
- Colour family Black Marble
See Black Diamond under the light
A live 3D scene built from a real photograph of the slab. Drag to rotate, scroll to zoom.
Drag to explore the texture
Drag: rotate
The 3D scene is generated in real time from an actual photograph of the slab and is intended as a guide. In natural stone the veining, tone and texture differ on every slab; the final choice should be made on a physical sample or slab approval.
Colour range sampled from the slab
Black Diamond is a rare gift of nature. Named for its dark, mysterious appearance, it is distinguished by white veins set against a deep black ground — a contrast that creates a singular effect indoors.
Black Diamond's deep black ground is ideal for creating an elegant, sophisticated atmosphere. The white veins are distributed gracefully across it, bringing movement and vitality to a room. Its appearance makes it a fine choice for anyone who wants to stand out in a modern, luxurious interior.
Care note
Marble is sensitive to acids (lemon, vinegar, wine, limescale remover). Use a neutral pH cleaner, wipe up spills at once and impregnate every 1–2 years.
Where is Black Diamond used?
A thickness, finish and detail recommendation for each application. Always confirm your choice on a physical sample before you start.
-
Flooring
-
Wall Cladding
-
Bathroom & Wet Areas
-
Kitchen Worktop
-
Stairs & Treads
-
Fireplace
-
Facade Cladding
-
Furniture & Objects
Surface finishes
- Polished
- Honed
- Brushed
- Antiqued
- Sandblasted
- Patinato
The surface finish changes the colour and reflection of the stone noticeably. You can compare the four main finishes in the studio.
Formats
- Block
- 2.4 – 3.0 × 1.5 – 2.0 × 1.5 – 2.0 mQuarry / stock selection
- Slab
- ~320 × 195 cm (variable)2 cm and 3 cm
- Cut-to-size
- 30×60 · 60×60 · 60×120 · 80×80 cm1.2 / 1.5 / 2 cm
- Custom cutting
- Waterjet, CNC, mitre, chamferProject-specific
- Dimensional tolerance
- ± 0.5 mm thicknessCalibrated
Technical data
- Density
- 2.68 – 2.72 g/cm³EN 1936
- Water absorption (by weight)
- 0.15 – 0.35%EN 13755
- Compressive strength
- 85 – 125 MPaEN 1926
- Flexural strength
- 9 – 16 MPaEN 12372
- Mohs hardness
- 3 – 4—
- Frost resistance
- SuitableEN 12371
The figures are typical ranges for the stone type; a test report can be requested per batch.
