Marble · Türkiye
Bruno Perla
Warm brown with a pearl-like sheen
- Origin Türkiye
- Stone type Marble
- Vein Uniform ground
- Block yield high
- Bookmatch Not advised
- Colour family Beige & Brown Marble
See Bruno Perla under the light
A live 3D scene built from a real photograph of the slab. Drag to rotate, scroll to zoom.
Drag to explore the texture
Drag: rotate
The 3D scene is generated in real time from an actual photograph of the slab and is intended as a guide. In natural stone the veining, tone and texture differ on every slab; the final choice should be made on a physical sample or slab approval.
Colour range sampled from the slab
Bruno Perla stands out as one of the most distinguished and striking of natural stones. Its unusual colour and remarkable veining give it a wide range of uses, from architectural projects to interior decoration. This singular stone is a perfect reflection of the beauty and grace of the natural world.
In interiors, Bruno Perla is chosen for its striking, sophisticated presence. On kitchen worktops, bathroom wall cladding and flooring, it lends a space a privileged air. With its natural beauty and durability it keeps the same lustre for years, adding value to a room.
Care note
Marble is sensitive to acids (lemon, vinegar, wine, limescale remover). Use a neutral pH cleaner, wipe up spills at once and impregnate every 1–2 years.
Where is Bruno Perla used?
A thickness, finish and detail recommendation for each application. Always confirm your choice on a physical sample before you start.
-
Flooring
-
Wall Cladding
-
Bathroom & Wet Areas
-
Kitchen Worktop
-
Stairs & Treads
-
Fireplace
-
Facade Cladding
-
Furniture & Objects
Surface finishes
- Polished
- Honed
- Brushed
- Antiqued
- Sandblasted
- Patinato
The surface finish changes the colour and reflection of the stone noticeably. You can compare the four main finishes in the studio.
Formats
- Block
- 2.4 – 3.0 × 1.5 – 2.0 × 1.5 – 2.0 mQuarry / stock selection
- Slab
- ~320 × 195 cm (variable)2 cm and 3 cm
- Cut-to-size
- 30×60 · 60×60 · 60×120 · 80×80 cm1.2 / 1.5 / 2 cm
- Custom cutting
- Waterjet, CNC, mitre, chamferProject-specific
- Dimensional tolerance
- ± 0.5 mm thicknessCalibrated
Technical data
- Density
- 2.68 – 2.72 g/cm³EN 1936
- Water absorption (by weight)
- 0.15 – 0.35%EN 13755
- Compressive strength
- 85 – 125 MPaEN 1926
- Flexural strength
- 9 – 16 MPaEN 12372
- Mohs hardness
- 3 – 4—
- Frost resistance
- SuitableEN 12371
The figures are typical ranges for the stone type; a test report can be requested per batch.
