Dolomite · Ontario / Canada
Eramosa
Layered dolomite with a wood-like effect
- Origin Ontario / Canada
- Stone type Dolomite
- Vein Directional flow
- Block yield medium
- Bookmatch Available
- Colour family Beige & Brown Marble
See Eramosa under the light
A live 3D scene built from a real photograph of the slab. Drag to rotate, scroll to zoom.
Drag to explore the texture
Drag: rotate
The 3D scene is generated in real time from an actual photograph of the slab and is intended as a guide. In natural stone the veining, tone and texture differ on every slab; the final choice should be made on a physical sample or slab approval.
Colour range sampled from the slab
Eramosa is a stone that carries the singular texture of nature into modern spaces. The magnificent harmony of brown and grey tones gives a room a warm atmosphere and a natural beauty. It brings the calm and grace of nature indoors while emphasising the elegance of a modern space.
Used in architectural projects, Eramosa gives a space a distinctive, modern air. It is chosen in settings from luxury homes to hotel lobbies, from shop interiors to restaurants. Its unusual veining gives a room character, bringing a sophisticated refinement and natural beauty to interiors.
Care note
Marble is sensitive to acids (lemon, vinegar, wine, limescale remover). Use a neutral pH cleaner, wipe up spills at once and impregnate every 1–2 years.
Where is Eramosa used?
A thickness, finish and detail recommendation for each application. Always confirm your choice on a physical sample before you start.
-
Kitchen Worktop
-
Flooring
-
Wall Cladding
-
Bathroom & Wet Areas
Surface finishes
- Polished
- Honed
- Leathered
The surface finish changes the colour and reflection of the stone noticeably. You can compare the four main finishes in the studio.
Formats
- Block
- 2.4 – 3.0 × 1.5 – 2.0 × 1.5 – 2.0 mQuarry / stock selection
- Slab
- ~320 × 195 cm (variable)2 cm and 3 cm
- Cut-to-size
- 30×60 · 60×60 · 60×120 · 80×80 cm1.2 / 1.5 / 2 cm
- Custom cutting
- Waterjet, CNC, mitre, chamferProject-specific
- Dimensional tolerance
- ± 0.5 mm thicknessCalibrated
Technical data
- Density
- 2.70 – 2.85 g/cm³EN 1936
- Water absorption (by weight)
- 0.10 – 0.30%EN 13755
- Compressive strength
- 110 – 160 MPaEN 1926
- Flexural strength
- 11 – 18 MPaEN 12372
- Mohs hardness
- 3.5 – 4—
- Frost resistance
- SuitableEN 12371
The figures are typical ranges for the stone type; a test report can be requested per batch.
